_category-thumb.webp "Solvents")
Acrylic finish putty 1,5 kg Coloris
High adhesion
Used for leveling defects on plastered surfaces, concrete, drywall, and other surfaces
Premium
SKU CG401601
EAN 4841498011736
In stock
Hint In Stock
59,00 MDL
0,08 pack.
Surface type
Paint coatings, Concrete, Brick, Plywood, Chipboard, For covering materials, Fiberboard
Type
For surface treatment before painting
Execution of works
Manual
Base material
Acrylic binders with ultra-fine marble filler.
Compound
Acrylic Dispersion
Consumption in one layer
0,5–0,8 кg/m²
Drying Time (Full)
2 - 4 hours
Terms of validity
12 moths
Operating temperature
From +5°С to +35°С
Weight
1,5 kg
Show more
Show less
Coloris Acrylic Finish Filler is used for leveling defects on plastered surfaces, concrete, drywall, or other surfaces inside rooms that are to be painted with water-based paints, alkyd enamels, or for wallpaper application.
Coloris Finish Filler is eco-friendly, easy to apply, has no strong odor, and dries quickly. It is easy and fast to sand, reducing finishing time. It has good adhesion and resistance to shrinkage. It is very flexible and crack-resistant. It improves the appearance of finishing elements and the quality of finishing work.
Before applying the finish filler, the surface must be cleaned of old paint layers, dirt, dust, and grease. Old paint and lime must be removed from previously painted surfaces. It is recommended to prime the surface with Coloriks Bio Protect water-based primer before applying the finish filler.
To achieve a thin finish layer of about 1 mm, approximately 0.8 kg of finish filler is required for a 1 m² surface. The drying time for one layer of finish at a temperature of +20°C and a relative air humidity of 65% does not exceed 1 hour (the next layer can be applied after 3 hours). The waiting time before applying the primer or paint is at least 24 hours.
Coloris Acrylic Finish Filler is available in plastic buckets, with packaging weights ranging from 1.5 to 17 kg.
